Tim Sutton

Review- Stokers HotRod Factory_fan spacers

Tim Sutton
Review- Stokers HotRod Factory_fan spacers

Review

Stokers Hotrod Factory 

fan spacers for flathead


_24A6309.jpg

In the search for all things to cool on a flathead you may have come up a little short when the fan comes into play. Dealing with stock parts even though they work in most applications. Maybe you'd benefit from a bigger fan from the aftermarket but are having a hard time adapting them to your hotrods engine. As in this case necessity breeds invention. Stokers hotrod factory is always making stuff run well and made for daily driven hotrods which can be a little precarious when your dealing with vintage engines. 

They came up with these little fully systems to get an aftermarket fan exactly where it needs to be. The pulley made for wide v belts bolts on the front of any GM alternator or powergen and allows the acceptance of an aftermarket fan to cool your flatty a little better pulling more air through the Rad. They also have spacers in half inch increments from 1/2 , 1 , and 1 1/2 inches to get the fan up close and personal with the radiator where it should be . These work great for a ton of applications.


_24A6294.jpg

Pulley only $60.00

 

Spacers are available in 1/2", 1", and 1 1/2" for ideal fan / radiator placement. Bolts are included with the spacers.

 

Priced at $20 / $22 / $24

 

Currently available for purchase at www.stokershotrodfactory.com or call 909-920-6797


_24A6330.jpg